Advanced IP-KNX interface Konnect4 for KNX and/or Control4 installations
Description
Native integration in Control4 of Ekinex devices and configuration in Composer Pro
The Ekinex device range is now compatible with the Control4 ecosystem. In Composer Pro it is possible to configure Ekinex products and integrate them into a Control4 automation system, even making them interact with third-party devices.
A single driver for all our wall-mount devices
All Ekinex wall-mount devices with thermostats are programmable with our Composer Pro driver, which automatically recognizes the model and allows the operating parameters to be set.
All the programming done in Composer Pro
No Need for ETS: all programming can be done directly within Composer Pro!
Thanks to SDDP discovery, the Konnect 4 gateway and all devices connected to the BUS are automatically detected and added to the project. The supplied drivers allow you to download the configuration directly from Composer Pro, and offer all the connections necessary to realize the functions you want.
Advantages
Flexibility of combining EKINEX and CONTROL4 products in the same installation.
Very easy cabling for installers.
Enhancement of the Control4 proposal with design-oriented products.
The same devices can be used by KNX professionals (with ETS) and by non-experts directly in Composer Pro.
Maximum reliability being the solution based on KNX standard.
Win-win product offering for all markets, by fitting the different needs, styles and expectations of installers and end users.
Related products
-
AtiosAtios KNX Bridge Matter-KNX-DALI2
Control your KNX devices with Apple Home, the preinstalled and easy to use App with remote-access... -
Siemens
N 125/22 – KNX power supply, DC 29 V, 640 mA, additional unchoked output
KNX power supply unit, 640mA-5WG1 125-1AB22 -
Basalte
Mud ring for euro-size products
Wall box for hollow walls, 1-gang -9064-02 (62mm) -
Jung
1-gang toggle push-button insert, 1-pole, 1-way NO contact, without claws, 10 A 250 V ~
K531EU – with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without... -
Siemens
N 512C01 – KNX load switch, 8 x AC 120/277/347 V, 20 A, C-load (cUL listed)
KNX load switch-5WG1 512-1CB01 -
Jung
Centre plate with toggle lever “cone”, with lens, 1 toggle lever, LS 1912 range
for 1-gang toggle switch ref.-no.: K 506 KO EU for 1-gang toggle push-button ref.-no.: K 534... -
Jung
Centre plate with toggle lever “cone”, with lens, 2 toggle levers, LS 1912 range
for 2-gang toggle switch ref.-no.: K 505 EU 5 for 2-gang toggle switch with indicator light... -
Siemens
N 148/12 – KNX USB Interface DIN rail mounting device
The KNX USB Interface is a data interface between a PC or laptop and the KNX installation bus. It can... -
Ekinex“Virtual” pushbutton Signum with Thermostst
Description “Virtual” KNX-standard pushbutton, i.e. based on a borderless IPS touch display, in which each button... -
Ekinex
5-fold pushbutton with backlit text/symbols and proximity sensor (right-hand version)
Description The Ekinex® 20venti series 5-fold pushbutton is used for on/off control of utility devices, dimming... -
Jung
2-gang toggle multi push-button (insert), 2 x 1-pole, 2-way push-button with 4 floating 1-way NO contacts, rocker in neutral position, A 250 V ~
K532-4EU – with screw terminals for rigid and flexible wires up to 2.5 mm2 screw fixing... -
Ekinex
4-fold pushbutton (right) with backlit text/symbols and proximity sensor
Description The Ekinex® 20venti series 4-fold pushbutton is used for on/off control of utility devices, dimming...
