Jung
KNX room controller LS TOUCH with frame LS 990, Secure, thermoplastic lacquered, matt snow white
LS459D1SWWM – with integrated 1-gang frame LS 990 Only install as a single device, not suitable for combinations!
Description
LS459D1SWWM – with integrated 1-gang frame LS 990 Only install as a single device, not suitable for combinations!
Related products
-
CasambiCBU-PWM4-4- Casambi-enabled four-channel PWM dimmer
CBU-PWM4-4 is a Bluetooth-controllable, Casambi-enabled four-channel PWM dimmer for constant voltage LED loads, such as LED... -
Siemens
JB 513C23 – KNX binary output, 3 x 6 A, AC 120–277 V
KNX binary output (relay) as built-in device-5WG1 513-4CB23 -
Jung
1-gang toggle multi push-button (insert), 1-pole, 2-way push-button with 2 x 2 NO contacts, rocker in neutral position, 10 A 250 V ~
K531-41EU – with screw terminals for rigid and flexible wires up to 2.5 mm2 screw fixing... -
Siemens
N 148/23 – KNX IP Interface Secure
IP Interface Secure is used for communication between KNX devices and PCs or other devices with... -
Siemens
N 125/02 – KNX power supply, DC 29 V, 160 mA, additional unchoked output
KNX power supply unit, 160 mA-5WG1 125-1AB02 -
Famatel.USA
MagnaUL NEMA 4X Polycarbonate Enclosure (15.7” x 23.6” x 7.8”, 14.8 Lbs) – 39146UL+I39146
MagnaUL NEMA 4X Polycarbonate enclosure, for indoor and outdoor installations. Description · NEMA 4X · Polycarbonate... -
Siemens
JB 525C23 – KNX universal dimmer, 1 x AC 120 V, 10–125 VA (R/L/C load)
KNX universal dimmer as built-in device-5WG1 525-4CB23 -
Siemens
N 146/03 – KNX IP Router Secure
The IP router connects KNX lines via data networks using the internet protocol (IP) and the... -
Famatel.USA
MagnaUL NEMA 4X Polycarbonate Enclosure (8.27” x 11” x 5.125”, 3 Lbs) – 39123UL + I39123
MagnaUL NEMA 4X Polycarbonate enclosure, for indoor and outdoor installations. Description · NEMA 4X · Polycarbonate... -
MoorgenMOORGEN M58 Series Casambi Smart Dimming Remote Control
Moorgen M58 Smart CASAMBI Dimming Remote Control Is powered by two batteries (not included) Replace the... -
Siemens
N 512C01 – KNX load switch, 8 x AC 120/277/347 V, 20 A, C-load (cUL listed)
KNX load switch-5WG1 512-1CB01 -
Siemens
N 125/22 – KNX power supply, DC 29 V, 640 mA, additional unchoked output
KNX power supply unit, 640mA-5WG1 125-1AB22
