Jung
KNX room controller LS TOUCH with frame LS 990, Secure, thermoplastic, white
LS459D1SWW – with integrated 1-gang frame LS 990 Only install as a single device, not suitable for combinations!
Description
LS459D1SWW – with integrated 1-gang frame LS 990 Only install as a single device, not suitable for combinations!
Related products
-
SiemensJB 520C23 – KNX shutter/blind actuator, 1 x AC 120 V, 6 A
KNX shutter/ blind actuator 1 x 6A-5WG1 520-4CB23 -
Siemens
N 148/12 – KNX USB Interface DIN rail mounting device
The KNX USB Interface is a data interface between a PC or laptop and the KNX installation bus. It can... -
Famatel.USA
MagnaUL NEMA 4X Polycarbonate Enclosure (8.27” x 11” x 5.125”, 3 Lbs) – 39123UL + I39123
MagnaUL NEMA 4X Polycarbonate enclosure, for indoor and outdoor installations. Description · NEMA 4X · Polycarbonate... -
Famatel.USA
MagnaUL NEMA 4X Polycarbonate Enclosure (15.7” x 19.6” x 6.89”, 10.8 Lbs) – 39145UL+I39145
MagnaUL NEMA 4X Polycarbonate enclosure for indoor and outdoor installations. Description · NEMA 4X · Polycarbonate... -
Sale!
ApporoApporo AiAgent
Industrial-grade smart building controller with universal protocol support — KNX, Matter, BACnet, Modbus, and beyond. AI... -
Siemens
N 125/22 – KNX power supply, DC 29 V, 640 mA, additional unchoked output
KNX power supply unit, 640mA-5WG1 125-1AB22 -
Siemens
JB 260C23 – KNX binary input, 4 x AC/DC 12–230 V
KNX binary input, 4-fold-5WG1 2604-CB23 -
WAGO
Bus connection block-2050 RT SW
Bus connection block-2050 RT SW -
Siemens
JB 510C23 – KNX binary output, 2 x AC 120–277 V, 10 A (resistive load)
KNX binary output (relay) as built-in device-5WG1 510-4CB23 -
Siemens
N 146/03 – KNX IP Router Secure
The IP router connects KNX lines via data networks using the internet protocol (IP) and the... -
Jung
1-gang toggle multi push-button (insert), 1-pole, 2-way push-button with 2 x 2 NO contacts, rocker in neutral position, 10 A 250 V ~
K531-41EU – with screw terminals for rigid and flexible wires up to 2.5 mm2 screw fixing... -
Siemens
N 125/12 – KNX power supply, DC 29 V, 320 mA, additional unchoked output
KNX power supply unit, 160 mA-5WG1 125-1AB12
