Siemens
N 141/03/N 141/21 KNX/DALI GATEWAY PLUS &TWIN PLUS
KNX Dali Gateway-5WG1 141-1AB02
Description
- 1 or 2 DALI Channel, 64 or 128 DALI devices per channel
- Replacement of defective ECGs without software
- DALI max. length: 1000ft with 2x14AWG
- DALI-2 certified
- Support of DALI DT8 ECGs (tunable white)
Related products
-
Siemens
Lighting Control Enclosures 2-row
Lighting Control Enclosures -
Ekinex
“Virtual” pushbutton Signum
Description “Virtual” KNX-standard pushbutton, i.e. based on a borderless IPS touch display, in which each button... -
Jung
Condensation sensor-BTS 01
Intended use Detection of water condensation on coolant lines in residential or functional buildings Connection to... -
Jung
KNX universal weather station-2225 WS U
Measurement and evaluation of weather data: wind speed, wind direction, precipitation, brightness, global radiation, twilight, temperature,... -
Casambi
CBU-DCS DALI controller
CBU-DCS is a Bluetooth controllable, Casambi enabled DALI controller. CBU-DCS does not have its own power... -
Jung
1-gang toggle push-button insert, 1-pole, 1-way NO contact, without claws, low Voltage-K 531 EU
with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without claws installation... -
Zennio
KUPSupply 320mA KNX Universal power supply 320 mA with additional output
KNX Universal System Power Supply with additional 29 V DC output. Maximum current 320 mA. 110-240... -
Jung
Combination 1 gang JUNG LS1912 “cone” classic brass
Combination with toggle lever "cone", 1 toggle lever, LS 1912 range, classic brass Combination includes: 1-gang... -
Siemens
N 512C01 – KNX Load switch, 8 x AC 120 V / AC 277 V / AC 347 V‚ 20 A, C load (cUL listed)
KNX load switch-5WG1 512-1CB01 -
Siemens
N 526E02 – KNX Switch/dimming actuator 8 x AC 230 V, 16 A, 1…10 V, UL standard
KNX switch/dim actuator 8 x AC 230V, 16A-5WG1 526-1EB02 -
Jung
Centre plate with toggle lever “cone”, 2 x 2 toggle levers, horizontal, LS 1912 range
for 2-gang toggle switch ref.-no.: K 505 EU, K 509 EU for 2-gang toggle push-button ref.-no.:... -
Siemens
N 148/12 – KNX USB Interface Din Rail mounting device-5WG11481AB12
The KNX USB Interface is a data interface between a PC or laptop and the KNX installation bus. It can...
Reviews
There are no reviews yet.