Zennio
KUPSupply 640mA KNX Universal power supply 640 mA with additional output
KNX Universal System Power Supply with additional 29 V DC output. Maximum current 640 mA. 110-240 V ~ 50/60 Hz input voltage. Installation in DIN-rail (4.5 units).
Description
KNX Universal System Power Supply with additional 29 V DC output. Maximum current 640 mA. 110-240 V ~ 50/60 Hz input voltage. Installation in DIN-rail (4.5 units).
Related products
-
Zennio
Lumento DX4 v2. 4-channel constant voltage PWM dimmer in DIN rail for DC LED loads.
LED dimmer with 4 channels designed for LED technology, featuring constant voltage regulation and DIN-rail mounting... -
Zennio
KLIC-DA v2. Daikin-KNX gateway (Altherma LT range)
Zennio gateway to control Daikin Altherma/Altherma 3 units from KNX system in a bidirectional way (see... -
Zennio
KLIC-PA. Panasonic gateway
Zennio gateway to control Panasonic air conditioning units from KNX system in a bidirectional way. It... -
Zennio
KLIC-SG. Samsung-KNX gateway (VRF and Industrial range)
Zennio gateway to control Samsung VRF and Industrial air conditioning units from KNX system in a... -
Zennio
MAXinBOX 8 v4. KNX multifunction actuator with KNX Secure – 8 outputs 16A
Multifunction actuator for DIN-rail (4.5 units) with 8 outputs (16 A C-Load) which offer multiple configuration... -
Zennio
DALI BOX Broadcast 4CH v2 KNX-DALI Broadcast Interface for up to 4 channels with up to 64 ballasts each
KNX-DALI broadcast interface module for DIN rail mounting (4.5 units). It incorporates 4 channels controlled via... -
Zennio
KLIC-FJ Gateway
Zennio gateway to control Fujitsu, General, Hiyasu and Fuji Electric air conditioning units from KNX system... -
Zennio
KLIC-MITT v3. Mitsubishi Electric-KNX gateway (IT connector)
Zennio gateway to control Mitsubishi Electric air conditioning units through IT terminal connector from KNX system... -
Zennio
MINiBOX 0-10V X2. 2 fold 0-10V analog input/output multifunction module
DIN rail mounting actuator (2 DIN wide) with 2 channels configurable as 0-10 V outputs, 0-10... -
Zennio
EyeZen TP v2 KNX motion detector with luminosity sensor for ceiling mounting
Motion detector with luminosity sensor for ceiling mounting, with a detection area of 360º and up... -
Zennio
KLIC-DI v2. Daikin-KNX gateway (SKY and VRV range)
Zennio gateway to control Daikin commercial and industrial air-conditioning units from KNX system in a bidirectional... -
Zennio
DALI BOX Interface 64 X2. KNX-DALI Interface for up to 64 ballasts per channel – 2 channels
KNX-DALI Interface for DIN-rail (4.5 units) with two independent DALI channels, to control up to 64...
Reviews
There are no reviews yet.