Description
Color control starts with the LED tape behind it. The LED Tape RGBCW 360 combines red, green, blue, warm white (2400K), and cool white (6500K) channels on a single 12mm PCB, giving specifiers the ability to dial in any color point or white tone without swapping fixtures or running parallel strips.
At 360 LEDs per meter, density is the foundation. That chip count keeps the light source continuous rather than segmented, which matters in coves, niches, and any installation where the tape itself is visible or only partially diffused. A CRI of >95 across white channels means skin tones, textiles, and finishes read accurately regardless of where you land on the color temperature range. Color consistency is held to a 3-Step MacAdam ellipse with one-bin sourcing, so every reel matches.
The tape runs on 24V DC constant voltage and cuts at 50mm intervals, allowing precise field trimming without waste or compromise. Each individual channel (R, G, B, 2400K, 6500K) draws 4.8 W/m with a 5-meter maximum run. The combined RGBCW load reaches 24 W/m at full output, producing 1,281.6 lm/m when all channels are driven simultaneously. Base IP rating is IP20. For wet or exposed installations, the same tape is available upgraded to IP54, IP65, IP67, or IP68.
Rated at 50,000 hours with a five-year warranty, this is LED tape built for integration into permanent architectural conditions, not temporary or decorative applications.
Reviews
There are no reviews yet.