Back Web Shop
Somfy

Somfy animeo KNX RS485 Motor Controller, 18 motors, surface mount

SKU: 1860286
KNX. This product works with KNX, the worldwide open standard for home and building automation (ISO/IEC 14543-3). KNX devices from different manufacturers work together and are set up by a KNX partner with the ETS software.

KNX interface for Somfy RS485 shade motors. Controls up to 18 motors one by one or in groups, with exact position feedback to the KNX bus. Powered from the KNX bus.
Got questions?

Feel free to get in touch

Somfy animeo KNX RS485 Motor Controller, 18 motors, surface mount

The Somfy animeo KNX RS485 Motor Controller connects Somfy digital RS485 motors to a KNX system. One controller handles up to 18 motors, either one by one or in groups, so a whole facade or floor of shades can run from one device.

Communication works both ways. While a shade moves, the controller reports its position to the KNX bus, and it also reports when the upper or lower end is reached. Each shade can be sent to any position from 0 to 100 % with a single command, so many shades stop at exactly the same height for a clean look from inside and outside.

For wind, alarm or other safety events you can set up to four safety positions. After a safety move, normal commands are locked until the system releases them again.

Good to know

  • Works only with Somfy RS485 (digital) motors, not with standard 120 V or 230 V shade motors.
  • Suitable for roller shades, interior blinds and exterior blinds.
  • Surface mounted, for a technical room or a cabinet.
  • Powered from the KNX bus, no separate power supply needed for the controller.
  • Configured in ETS by a KNX System Integrator.

Technical data

System KNX / Somfy RS485
Motors up to 18 Somfy RS485 motors
Control single motors or groups
Position 0 to 100 % (1 byte), position and end position feedback
Safety 4 safety positions with command lock
Supply KNX bus, 21 to 30 V DC (SELV)
KNX current max. 12.5 mA
Mounting surface mount
Size W x H x D 90 x 180 x 45 mm (3.5 x 7.1 x 1.8 in)
Protection IP20
Operating temperature 0 to 40 °C (32 to 104 °F)

You may also like