Jung
KNX room controller display module, 2-gang, F50, Secure, LS range
SKU: LS5292D1ST
Category: F50, JUNG, KNX, LS990, Room Controller 2 Gang
LS5292D1ST – for cover kit 2-gang, ref.-no.: ..502 TSA .. in the LS range can be extended by means of a push-button extension module, ref.-no.: LS 509.. TSEM
Description
LS5292D1ST – for cover kit 2-gang, ref.-no.: ..502 TSA .. in the LS range can be extended by means of a push-button extension module, ref.-no.: LS 509.. TSEM
Related products
-
SiemensJB 520C23 – KNX shutter/blind actuator, 1 x AC 120 V, 6 A
KNX shutter/ blind actuator 1 x 6A-5WG1 520-4CB23KNX -
SiemensN 125/22 – KNX power supply, DC 29 V, 640 mA, additional unchoked output
KNX power supply unit, 640mA-5WG1 125-1AB22KNX -
SiemensJB 525C23 – KNX universal dimmer, 1 x AC 120 V, 10–125 VA (R/L/C load)
KNX universal dimmer as built-in device-5WG1 525-4CB23KNX -
SiemensJB 521C23 – Shutter/blind actuator, 2 x AC 120 V, 6 A
KNX shutter/ blind actuator 2 x 6A-5WG1 521-4CB23KNX -
SiemensN 140/13 – KNX line/backbone coupler
The line-/ backbone coupler provides a data connection between two separate KNX bus lines and isolates...KNX -
CasambiCBU-PWM4-4- Casambi-enabled four-channel PWM dimmer
CBU-PWM4-4 is a Bluetooth-controllable, Casambi-enabled four-channel PWM dimmer for constant voltage LED loads, such as LED...Bluetooth · Casambi · DALI -
Jung1-gang toggle push-button insert, 1-pole, 1-way NO contact with separate contacts for indicator light, without claws, 10 A 250 V ~
K534EU – with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without...Conventional -
Jung1-gang toggle push-button insert, 1-pole, 1-way NO contact, without claws, 10 A 250 V ~
K531EU – with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without...Conventional -
Famatel.USAMagnaUL NEMA 4X Polycarbonate Enclosure (11.8” x 15.7” x 6.45”, 5.9 Lbs) – 39134UL+I39134
MagnaUL NEMA 4X Polycarbonate enclosure, for indoor and outdoor installations. Description · NEMA 4X · Polycarbonate...DIN Rail · Enclousers · KNX -
SiemensN 512C01 – KNX load switch, 8 x AC 120/277/347 V, 20 A, C-load (cUL listed)
KNX load switch-5WG1 512-1CB01KNX -
SiemensJB 513C23 – KNX binary output, 3 x 6 A, AC 120–277 V
KNX binary output (relay) as built-in device-5WG1 513-4CB23KNX -
SiemensN 125/02 – KNX power supply, DC 29 V, 160 mA, additional unchoked output
KNX power supply unit, 160 mA-5WG1 125-1AB02KNX
