Zennio
KLIC-FJT – Fujitsu-KNX gateway
Zennio gateway to control Fujitsu, General, Hiyasu and Fuji Electric air conditioning units from KNX system in a bidirectional way through CN65 connector. It includes 2 analog-digital inputs for temperature probes, motion sensor or dry cont
Description
Zennio gateway to control Fujitsu, General, Hiyasu and Fuji Electric air conditioning units from KNX system in a bidirectional way through CN65 connector. It includes 2 analog-digital inputs for temperature probes, motion sensor or dry cont
Related products
-
SiemensJB 525C23 – KNX universal dimmer, 1 x AC 120 V, 10–125 VA (R/L/C load)
KNX universal dimmer as built-in device-5WG1 525-4CB23 -
Jung
1-gang toggle push-button insert, 1-pole, 1-way NO contact, without claws, 10 A 250 V ~
K531EU – with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without... -
Famatel.USA
MagnaUL NEMA 4X Polycarbonate Enclosure (8.27” x 11” x 5.125”, 3 Lbs) – 39123UL + I39123
MagnaUL NEMA 4X Polycarbonate enclosure, for indoor and outdoor installations. Description · NEMA 4X · Polycarbonate... -
Siemens
N 148/12 – KNX USB Interface DIN rail mounting device
The KNX USB Interface is a data interface between a PC or laptop and the KNX installation bus. It can... -
Siemens
N 125/02 – KNX power supply, DC 29 V, 160 mA, additional unchoked output
KNX power supply unit, 160 mA-5WG1 125-1AB02 -
Siemens
N 512C01 – KNX load switch, 8 x AC 120/277/347 V, 20 A, C-load (cUL listed)
KNX load switch-5WG1 512-1CB01 -
Siemens
N 125/22 – KNX power supply, DC 29 V, 640 mA, additional unchoked output
KNX power supply unit, 640mA-5WG1 125-1AB22 -
Siemens
JB 521C23 – Shutter/blind actuator, 2 x AC 120 V, 6 A
KNX shutter/ blind actuator 2 x 6A-5WG1 521-4CB23 -
WAGO
Bus connection block-2050 RT SW
Bus connection block-2050 RT SW -
Siemens
N 140/13 – KNX line/backbone coupler
The line-/ backbone coupler provides a data connection between two separate KNX bus lines and isolates... -
Siemens
JB 513C23 – KNX binary output, 3 x 6 A, AC 120–277 V
KNX binary output (relay) as built-in device-5WG1 513-4CB23 -
Siemens
N 125/12 – KNX power supply, DC 29 V, 320 mA, additional unchoked output
KNX power supply unit, 160 mA-5WG1 125-1AB12
