Zennio
KUPSupply 640mA – KNX power supply plus 29VDC auxiliary output
KNX Universal System Power Supply with additional 29 V DC output. Maximum current 640 mA. 110-240 V ~ 50/60 Hz input voltage. Installation in DIN-rail (4.5 units).
Description
KNX Universal System Power Supply with additional 29 V DC output. Maximum current 640 mA. 110-240 V ~ 50/60 Hz input voltage. Installation in DIN-rail (4.5 units).
Related products
-
SiemensN 125/12 – KNX power supply, DC 29 V, 320 mA, additional unchoked output
KNX power supply unit, 160 mA-5WG1 125-1AB12 -
Famatel.USA
MagnaUL NEMA 4X Polycarbonate Enclosure (11.8” x 15.7” x 6.45”, 5.9 Lbs) – 39134UL+I39134
MagnaUL NEMA 4X Polycarbonate enclosure, for indoor and outdoor installations. Description · NEMA 4X · Polycarbonate... -
Siemens
N 526E02 – KNX switch/dimming actuator, 8 x AC 230 V, 16 A, 1–10 V, UL standard
KNX switch/dim actuator 8 x AC 230V, 16A-5WG1 526-1EB02 -
Siemens
N 148/23 – KNX IP Interface Secure
IP Interface Secure is used for communication between KNX devices and PCs or other devices with... -
Smart Building SolutionsETS6-PROFESSIONAL
Purchase your licensed ETS6 PROFESSIONAL software directly from my.knx.com It's a simple process! Version: ETS6 PROFESSIONAL... -
Siemens
JB 510C23 – KNX binary output, 2 x AC 120–277 V, 10 A (resistive load)
KNX binary output (relay) as built-in device-5WG1 510-4CB23 -
Siemens
N 146/03 – KNX IP Router Secure
The IP router connects KNX lines via data networks using the internet protocol (IP) and the... -
Jung
1-gang toggle push-button insert, 1-pole, 1-way NO contact, without claws, 10 A 250 V ~
K531EU – with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without... -
Jung
2-gang toggle multi push-button (insert), 2 x 1-pole, 2-way push-button with 4 floating 1-way NO contacts, rocker in neutral position, A 250 V ~
K532-4EU – with screw terminals for rigid and flexible wires up to 2.5 mm2 screw fixing... -
WAGO
Bus connection block-2050 RT SW
Bus connection block-2050 RT SW -
Siemens
N 125/22 – KNX power supply, DC 29 V, 640 mA, additional unchoked output
KNX power supply unit, 640mA-5WG1 125-1AB22 -
Siemens
JB 513C23 – KNX binary output, 3 x 6 A, AC 120–277 V
KNX binary output (relay) as built-in device-5WG1 513-4CB23
