Jung
KNX room controller LS TOUCH with frame LS 990, Secure, aluminium laquered, dark
AL459D1SD – with integrated 1-gang frame LS 990 Only install as a single device, not suitable for combinations!
Description
AL459D1SD – with integrated 1-gang frame LS 990 Only install as a single device, not suitable for combinations!
Related products
-
SiemensN 143/01 – KNX IP Gateway KNX/BACnet
The IP Gateway KNX-BACnet N 143 is is a DIN rail mounted device connecting a KNX... -
Jung
1-gang toggle push-button insert, 1-pole, 1-way NO contact with separate contacts for indicator light, without claws, 10 A 250 V ~
K534EU – with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without... -
WAGO
Bus connection block-2050 RT SW
Bus connection block-2050 RT SW -
Siemens
N 146/03 – KNX IP Router Secure
The IP router connects KNX lines via data networks using the internet protocol (IP) and the... -
Jung
1-gang toggle push-button insert, 1-pole, 1-way NO contact, without claws, 10 A 250 V ~
K531EU – with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without... -
Famatel.USA
MagnaUL NEMA 4X Polycarbonate Enclosure (15.7” x 19.6” x 6.89”, 10.8 Lbs) – 39145UL+I39145
MagnaUL NEMA 4X Polycarbonate enclosure for indoor and outdoor installations. Description · NEMA 4X · Polycarbonate... -
Siemens
N 125/12 – KNX power supply, DC 29 V, 320 mA, additional unchoked output
KNX power supply unit, 160 mA-5WG1 125-1AB12 -
Famatel.USA
MagnaUL NEMA 4X Polycarbonate Enclosure (15.7” x 23.6” x 7.8”, 14.8 Lbs) – 39146UL+I39146
MagnaUL NEMA 4X Polycarbonate enclosure, for indoor and outdoor installations. Description · NEMA 4X · Polycarbonate... -
Crestron
Crestron Enclosure for DIN Rail Devices, 6 DIN Rails, 18 M Wide – DIN-EN-6X18
The Crestron® DIN‑EN series of UL® Listed enclosures provide centralized mounting solutions for DIN rail products... -
Siemens
N 512C01 – KNX load switch, 8 x AC 120/277/347 V, 20 A, C-load (cUL listed)
KNX load switch-5WG1 512-1CB01 -
Siemens
N 140/13 – KNX line/backbone coupler
The line-/ backbone coupler provides a data connection between two separate KNX bus lines and isolates... -
Siemens
N 125/02 – KNX power supply, DC 29 V, 160 mA, additional unchoked output
KNX power supply unit, 160 mA-5WG1 125-1AB02
