Advanced IP-KNX interface Konnect4 for KNX and/or Control4 installations
Description
Native integration in Control4 of Ekinex devices and configuration in Composer Pro
The Ekinex device range is now compatible with the Control4 ecosystem. In Composer Pro it is possible to configure Ekinex products and integrate them into a Control4 automation system, even making them interact with third-party devices.
A single driver for all our wall-mount devices
All Ekinex wall-mount devices with thermostats are programmable with our Composer Pro driver, which automatically recognizes the model and allows the operating parameters to be set.
All the programming done in Composer Pro
No Need for ETS: all programming can be done directly within Composer Pro!
Thanks to SDDP discovery, the Konnect 4 gateway and all devices connected to the BUS are automatically detected and added to the project. The supplied drivers allow you to download the configuration directly from Composer Pro, and offer all the connections necessary to realize the functions you want.
Advantages
Flexibility of combining EKINEX and CONTROL4 products in the same installation.
Very easy cabling for installers.
Enhancement of the Control4 proposal with design-oriented products.
The same devices can be used by KNX professionals (with ETS) and by non-experts directly in Composer Pro.
Maximum reliability being the solution based on KNX standard.
Win-win product offering for all markets, by fitting the different needs, styles and expectations of installers and end users.
Related products
-
JungFrame LS990 gold-coloured
Frame LS990 gold-coloured -
Basalte
Mud ring for euro-size products
Wall box for hollow walls, 1-gang -9064-02 (62mm) -
Jung
KNX push-button interface, 8-gang, Secure-40008 1S E
KNX push-button interface, 4-gang, Secure-40004 1S E -
Jung
Centre plate with toggle lever “cone”, with lens, 1 toggle lever, LS 1912 range
for 1-gang toggle switch ref.-no.: K 506 KO EU for 1-gang toggle push-button ref.-no.: K 534... -
Ekinex“Virtual” pushbutton Signum
Description “Virtual” KNX-standard pushbutton, i.e. based on a borderless IPS touch display, in which each button... -
Ekinex5-fold pushbutton with backlit text/symbols and proximity sensor
Description The Ekinex® 20venti series 5-fold pushbutton is used for on/off control of utility devices, dimming... -
Ekinex4-fold pushbutton (left) with backlit text/symbols and proximity sensor
Description The Ekinex® 20venti series 4-fold pushbutton is used for on/off control of utility devices, dimming... -
Jung
Condensation sensor-BTS 01
Intended use Detection of water condensation on coolant lines in residential or functional buildings Connection to... -
Jung
Leakage sensor-LES 01
Intended use Detection of water penetration and leaks Connection to KNX push-button interfaces or other binary... -
Siemens
N 512C01 – KNX load switch, 8 x AC 120/277/347 V, 20 A, C-load (cUL listed)
KNX load switch-5WG1 512-1CB01 -
Ekinex
5-fold pushbutton with backlit text/symbols and proximity sensor (right-hand version)
Description The Ekinex® 20venti series 5-fold pushbutton is used for on/off control of utility devices, dimming... -
Siemens
N 526E02 – KNX switch/dimming actuator, 8 x AC 230 V, 16 A, 1–10 V, UL standard
KNX switch/dim actuator 8 x AC 230V, 16A-5WG1 526-1EB02
Customer Reviews
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.