Intended use
Brightness-independent detection of motions in interiors
Connection to KNX e.g. multi station or push-button interface for automatic switching of loads
Power supply via unchoked output of a (KNX) power supply with SELV
Clamp mounting in suspended ceilings
Ceiling installation on fixed ceilings in flush box with dimensions according to DIN 49073 with flush mounting set (ref.-no.: PMM-UP-SET-WW)
Surface-mounted ceiling installation with surface mounting set (ref.-no.: PMM-AP-SET-WW)
Product characteristics
Brightness-independent detection of motions in the detection field
Switch on: After detection of a motion
Switch off: No motion in the detection field and run-on time elapsed
Floating electronic switching contact
Run-on time: approx. 270 s
Technical data about Motion detector mini basic, white BM 360 MB WW-270
| Rated voltage: |
DC 24 ... 32 V SELV |
| Stand-by power: |
< 0.1 W |
| Current consumption: |
max. 4 mA |
| Ambient temperature: |
−5 ... +45 °C |
| Stora/transport temperature: |
−25 ... +70 °C |
| Relative humidity: |
10 ... 100 % (no condensation) |
| Protection class: |
III |
| Degree of protection: |
IP44 |
| Motion detection |
| Detection angle: |
360° |
| Range: |
Ø approx. 6 m (mounting height 3 m) |
| Switching output |
| Electric strength: |
40 V |
| Current carrying capacity of device: |
max. 50 mA |
| Connected load: |
max. 0.15 W |
| Dimensions |
| Ceiling cut-out (Ø x D): |
44 x 35 mm |
| Dimensions (Ø x H): |
53.5 x 38 mm (with design ring) |
| Cable length: |
max. 30 m |
| Max. thickness of the suspended ceiling: |
approx. 25 mm |
| Installation depth: |
min. 35 mm |
| Distance between concrete ceiling and suspended ceiling: |
min. 20 mm |
| Design ring Ø inside: |
36.6 mm |
| Design ring Ø outside: |
53.5 mm |
| Height above surface, design ring: |
3 mm |
| Height above surface, lens: |
5.5 mm |
