-
rail mounting device, 4 rail units-non UL
Intended use
Controlling of luminaires and other applications with DALI operating device in KNX installations e.g. electronic ballast
Mounting on DIN rail according to EN 60715 in distribution box
Product characteristics
DALI-2 certified
Control of max. 2x 64 DALI devices in max. 2x 32 groups
Setting of colour temperature or light colour (RGB, RGBW) for luminaires with DALI Device Type 8 acc. to IEC 62386-209
Short-circuit, overload and overvoltage protected
Operating hours counter
Automatic colour circle pass or brightness pass
HCL mode (Human Centric Lighting), automatic daytime colour temperature gradient
CT (Colour Transition) mode, automatic day colour gradient
Suitable for operation with DC voltage of emergency lighting systems
Individual, group or central addressing
16 light scenes per DALI system
Read out DALI device state via KNX, e.g. brightness or luminaire error
Manual operation of the DALI groups, individual devices or central (broadcast) separately for each DALI system
Forced guidance of disabling function
Feedback of switching state and brightness value in bus and manual operation
Collective feedback
Central switching and dimming function
Disabling function for each DALI group or each individual device
Separate ON and OFF delay
Staircase lighting timer with switch-off warning
Online or offline project design of the DALI devices with ETS-DCA
Standby switch-off of the DALI devices
Replacement of a single DALI device of the same type, during operation, possible without software
KNX Data Secure compatible with ETS 5.7.7 or ETS 6.1.0 or higher
Can be updated with the ETS Service App
Technical data about KNX DALI-2 gateway Colour 2-gang, Rail mounting device, 4 rail units, Secure 30128 1S DA2 R