Zennio
MINiBOX 20 v2 – KNX Secure multifunction actuator, 2 outputs 16A
Multifunction actuator, supporting KNX Secure, for DIN rail (2 units) with 2 outputs (16 A C-load) which offer multiple configurations as shutter channels and individual outputs. It allows manual control of its outputs thanks to the push buttons on the cover and includes a logical function module. It is compatible...
Description
Multifunction actuator, supporting KNX Secure, for DIN rail (2 units) with 2 outputs (16 A C-load) which offer multiple configurations as shutter channels and individual outputs. It allows manual control of its outputs thanks to the push buttons on the cover and includes a logical function module. It is compatible...
Related products
-
Jung1-gang toggle push-button insert, 1-pole, 1-way NO contact with separate contacts for indicator light, without claws, 10 A 250 V ~
K534EU – with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without... -
Siemens
N 143/01 – KNX IP Gateway KNX/BACnet
The IP Gateway KNX-BACnet N 143 is is a DIN rail mounted device connecting a KNX... -
Siemens
N 148/12 – KNX USB Interface DIN rail mounting device
The KNX USB Interface is a data interface between a PC or laptop and the KNX installation bus. It can... -
Jung
1-gang toggle push-button insert, 1-pole, 1-way NO contact, without claws, 10 A 250 V ~
K531EU – with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without... -
Siemens
JB 512C23 – KNX switching actuator, 1 x AC 120–277 V, 20 A or AC 347 V, 15 AX, C-load
Binary output as built-in device-5WG1 512-4CB23 -
Siemens
N 512C01 – KNX load switch, 8 x AC 120/277/347 V, 20 A, C-load (cUL listed)
KNX load switch-5WG1 512-1CB01 -
Siemens
JB 510C23 – KNX binary output, 2 x AC 120–277 V, 10 A (resistive load)
KNX binary output (relay) as built-in device-5WG1 510-4CB23 -
Siemens
N 148/23 – KNX IP Interface Secure
IP Interface Secure is used for communication between KNX devices and PCs or other devices with... -
Siemens
JB 525C23 – KNX universal dimmer, 1 x AC 120 V, 10–125 VA (R/L/C load)
KNX universal dimmer as built-in device-5WG1 525-4CB23 -
Siemens
N 140/13 – KNX line/backbone coupler
The line-/ backbone coupler provides a data connection between two separate KNX bus lines and isolates... -
WAGO
Bus connection block-2050 RT SW
Bus connection block-2050 RT SW -
Famatel.USA
MagnaUL NEMA 4X Polycarbonate Enclosure (8.27” x 11” x 5.125”, 3 Lbs) – 39123UL + I39123
MagnaUL NEMA 4X Polycarbonate enclosure, for indoor and outdoor installations. Description · NEMA 4X · Polycarbonate...
