Jung
Cover kit 3-gang, F40 Room controller, LS range, classic brass
ME4093TSAC – with temperature symbol to clip on room controller display module ref.-no.: LS 429 D 1ST Metal versions Accessories: Cover with neutral symbol ref.-no.: LS 409 N
Description
ME4093TSAC – with temperature symbol to clip on room controller display module ref.-no.: LS 429 D 1ST Metal versions Accessories: Cover with neutral symbol ref.-no.: LS 409 N
Related products
-
SiemensN 526E02 – KNX switch/dimming actuator, 8 x AC 230 V, 16 A, 1–10 V, UL standard
KNX switch/dim actuator 8 x AC 230V, 16A-5WG1 526-1EB02 -
ZennioEyeZen TP v2 – KNX motion detector with luminosity sensor, ceiling mounting
Motion detector with luminosity sensor for ceiling mounting, with a detection area of 360º and up... -
Zennio
DALI BOX Broadcast 6CH v2 – KNX-DALI broadcast interface, 6 channels
KNX-DALI broadcast interface module for DIN rail mounting (4.5 units). It incorporates 6 channels controlled via... -
MoorgenMOORGEN M58 Series Casambi Smart Dimming Remote Control
Moorgen M58 Smart CASAMBI Dimming Remote Control Is powered by two batteries (not included) Replace the... -
Famatel.USA
MagnaUL NEMA 4X Polycarbonate Enclosure (15.7” x 23.6” x 7.8”, 14.8 Lbs) – 39146UL+I39146
MagnaUL NEMA 4X Polycarbonate enclosure, for indoor and outdoor installations. Description · NEMA 4X · Polycarbonate... -
ZennioTemperature probe 10K NTC
10K NTC temperature probe for Zennio inputs which allow custom NTC probe configuration. The compact size... -
Siemens
JB 512C23 – KNX switching actuator, 1 x AC 120–277 V, 20 A or AC 347 V, 15 AX, C-load
Binary output as built-in device-5WG1 512-4CB23 -
Siemens
JB 525C23 – KNX universal dimmer, 1 x AC 120 V, 10–125 VA (R/L/C load)
KNX universal dimmer as built-in device-5WG1 525-4CB23 -
Siemens
N 148/12 – KNX USB Interface DIN rail mounting device
The KNX USB Interface is a data interface between a PC or laptop and the KNX installation bus. It can... -
Zennio
DALI BOX Interface 64 v3 – KNX-DALI interface, 1 channel
KNX-DALI Interface for DIN-rail (4.5 units) to control up to 64 DALI ballasts, which can be... -
Siemens
JB 520C23 – KNX shutter/blind actuator, 1 x AC 120 V, 6 A
KNX shutter/ blind actuator 1 x 6A-5WG1 520-4CB23 -
Siemens
N 148/23 – KNX IP Interface Secure
IP Interface Secure is used for communication between KNX devices and PCs or other devices with...
