Jung
Cover kit 4-gang, F40, thermoplastic, LS range, white
SKU: LS404TSAWW
Category: Cover Kit 4 Gang, F40, JUNG, LS990, Thermoplastic
LS404TSAWW – to clip on F 40 push-button modules 4-gang ref.-no.: LS 4294 1ST, 4094 TSEM, 4074 RF TSM, 4248 TSM, 4008 TSM, FM 4004 M Thermoplastic (breakproof) high-gloss
Description
LS404TSAWW – to clip on F 40 push-button modules 4-gang ref.-no.: LS 4294 1ST, 4094 TSEM, 4074 RF TSM, 4248 TSM, 4008 TSM, FM 4004 M Thermoplastic (breakproof) high-gloss
Related products
-
MoorgenMOORGEN M58 Series Casambi Smart Dimming Remote Control
Moorgen M58 Smart CASAMBI Dimming Remote Control Is powered by two batteries (not included) Replace the...Casambi -
Jung1-gang toggle push-button insert, 1-pole, 1-way NO contact, without claws, 10 A 250 V ~
K531EU – with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without...Conventional -
Famatel.USAMagnaUL NEMA 4X Polycarbonate Enclosure (15.7” x 19.6” x 6.89”, 10.8 Lbs) – 39145UL+I39145
MagnaUL NEMA 4X Polycarbonate enclosure for indoor and outdoor installations. Description · NEMA 4X · Polycarbonate...DIN Rail · Enclousers · KNX -
SiemensJB 512C23 – KNX switching actuator, 1 x AC 120–277 V, 20 A or AC 347 V, 15 AX, C-load
Binary output as built-in device-5WG1 512-4CB23KNX -
Famatel.USAMagnaUL NEMA 4X Polycarbonate Enclosure (8.27” x 11” x 5.125”, 3 Lbs) – 39123UL + I39123
MagnaUL NEMA 4X Polycarbonate enclosure, for indoor and outdoor installations. Description · NEMA 4X · Polycarbonate...DIN Rail · Enclousers · KNX -
SiemensN 146/03 – KNX IP Router Secure
The IP router connects KNX lines via data networks using the internet protocol (IP) and the...KNX -
Jung2-gang toggle multi push-button (insert), 2 x 1-pole, 2-way push-button with 4 floating 1-way NO contacts, rocker in neutral position, A 250 V ~
K532-4EU – with screw terminals for rigid and flexible wires up to 2.5 mm2 screw fixing...Conventional -
SiemensN 125/12 – KNX power supply, DC 29 V, 320 mA, additional unchoked output
KNX power supply unit, 160 mA-5WG1 125-1AB12KNX -
SiemensN 125/02 – KNX power supply, DC 29 V, 160 mA, additional unchoked output
KNX power supply unit, 160 mA-5WG1 125-1AB02KNX -
SiemensN 148/12 – KNX USB Interface DIN rail mounting device
The KNX USB Interface is a data interface between a PC or laptop and the KNX installation bus. It can...KNX -
SiemensN 143/01 – KNX IP Gateway KNX/BACnet
The IP Gateway KNX-BACnet N 143 is is a DIN rail mounted device connecting a KNX...KNX -
SiemensJB 510C23 – KNX binary output, 2 x AC 120–277 V, 10 A (resistive load)
KNX binary output (relay) as built-in device-5WG1 510-4CB23KNX
