Cover kit 4-gang, F50, LS range
Description
to clip on F 50 push-button modules 4-gang of the LS range
ref.-no.: LS 5074 TSM, LS 5294 1ST, LS 5094 TSEM, LS 5294 D 1ST, LS 5074 RF TSM, LS 5248 TSM, FM LS 5004 M
Thermoplastic (breakproof) high-gloss
Cradle to Cradle certified
Related products
-
1-gang toggle push-button insert, 1-pole, 1-way NO contact with separate contacts for indicator light, without claws, low Voltage-K 534 EU
with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without clawsinstallation into flush box... -
KNX room controller LS TOUCH with frame LS 990, LS range, classic brass
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
KNX room controller LS TOUCH with frame LS 990, LS range, vert olive vif (4320F)
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
KNX room controller LS TOUCH with frame LS 990, LS range, matt graphite black
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
“Virtual” pushbutton Signum
Description “Virtual” KNX-standard pushbutton, i.e. based on a borderless IPS touch display, in which each button... -
KNX Secure multifunctional presence sensor-EK-SG2-TP-P
With the KNX Secure multifunctional presence sensor with microwave technology it is possible to detect the... -
“Virtual” pushbutton Signum with Thermostst
Description “Virtual” KNX-standard pushbutton, i.e. based on a borderless IPS touch display, in which each button... -
KNX room controller LS TOUCH with frame LS 990, LS range, antique brass
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
N 148/12 – KNX USB Interface Din Rail mounting device-5WG11481AB12
The KNX USB Interface is a data interface between a PC or laptop and the KNX installation bus. It can... -
Crestron Enclosure for DIN Rail Devices, 6 DIN Rails, 18 M Wide – DIN-EN-6X18
The Crestron® DIN‑EN series of UL® Listed enclosures provide centralized mounting solutions for DIN rail products... -
KNX Binary input, 8-gang-2128 REG
rail mounting device, 4 rail units8 inputs 12 … 48 V AC/DCAuxiliary voltage output DC 24 V (SELV) for polling floating contactswith status indicatorETS... -
KNX room controller LS TOUCH with frame LS 990, LS range, rouge rubia (32101)
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads...