Combi sensor-WS 10 KS

Rate Now

Description

The combi sensor serves for the measurement of the wind speed, brightness dawn and rain. The brightness can be measured for three directions, south, east and west, separately. It will be connected directly to the weather station which evaluates the measured data.
The combi sensor needs 24 V AC for operation. The necessary power can be supplied by the power supply unit ref.-no.: WSSV 10.

Technical data about Combi sensor WS 10 KS

Power supply
Sensor unit (incl. heating):	AC 24 V ~ ± 15 %, 50/60 Hz
Max. power consumption:	600 mA
Connection
Connection cable:	LiYCY, 6 x 0.25 mm², shielded
Length:	10 m, max. 50 m
Ambient conditions
Ambient temperature:	–40 ... +60 °C (free of ice)
Stora/transport temperature:	−40 ... +60 °C
Humidity:	outside the building
Housing
Degree of protection:	IP55
Protection class:	III
Dimensions (Ø x H):	130 x ca. 200 mm (without mounting bracket)
Mounting:	mounting bracket for wall or mast
Weight:	approx. 330 g (without mounting bracket)
Sensor signals:
Wind sensor
Measuring range:	approx. 1 ... 40 m/s
Accuracy:	≤ 0.5 m/s, −20 ... +60 °C
Precipitation sensor
Measuring range:	precipitation yes / no
Sensitivity:	fine drizzle
Switch-on delay:	approx. 3 rain particles
Switch-off delay:	approx. 2 min
Brightness sensor
Measuring range:	approx. 1 ... 110 klx
Spectral range:	approx. 700 ... 1050 nm
Direction:	east, south, west
Dawn sensor
Measuring range:	approx. 0 ... 674 lx