Zennio
KLIC-MITTE – Mitsubishi Ecodan-KNX gateway (IT connector)
Zennio gateway to control Mitsubishi Ecodan hydroboxes through IT terminal connector from KNX system in a bidirectional way. It includes 2 analog-digital inputs for temperature probes, motion sensor or dry contact binary inputs (switches, s
Description
Zennio gateway to control Mitsubishi Ecodan hydroboxes through IT terminal connector from KNX system in a bidirectional way. It includes 2 analog-digital inputs for temperature probes, motion sensor or dry contact binary inputs (switches, s
Related products
-
CasambiCBU-PWM4-4- Casambi-enabled four-channel PWM dimmer
CBU-PWM4-4 is a Bluetooth-controllable, Casambi-enabled four-channel PWM dimmer for constant voltage LED loads, such as LED... -
WAGO
Bus connection block-2050 RT SW
Bus connection block-2050 RT SW -
Jung
1-gang toggle push-button insert, 1-pole, 1-way NO contact with separate contacts for indicator light, without claws, 10 A 250 V ~
K534EU – with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without... -
Jung
1-gang toggle push-button insert, 1-pole, 1-way NO contact, without claws, 10 A 250 V ~
K531EU – with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without... -
Siemens
JB 510C23 – KNX binary output, 2 x AC 120–277 V, 10 A (resistive load)
KNX binary output (relay) as built-in device-5WG1 510-4CB23 -
Siemens
JB 513C23 – KNX binary output, 3 x 6 A, AC 120–277 V
KNX binary output (relay) as built-in device-5WG1 513-4CB23 -
Siemens
JB 521C23 – Shutter/blind actuator, 2 x AC 120 V, 6 A
KNX shutter/ blind actuator 2 x 6A-5WG1 521-4CB23 -
Jung
2-gang toggle multi push-button (insert), 2 x 1-pole, 2-way push-button with 4 floating 1-way NO contacts, rocker in neutral position, A 250 V ~
K532-4EU – with screw terminals for rigid and flexible wires up to 2.5 mm2 screw fixing... -
Sale!
ApporoApporo AiAgent
Industrial-grade smart building controller with universal protocol support — KNX, Matter, BACnet, Modbus, and beyond. AI... -
Siemens
N 140/13 – KNX line/backbone coupler
The line-/ backbone coupler provides a data connection between two separate KNX bus lines and isolates... -
Siemens
JB 520C23 – KNX shutter/blind actuator, 1 x AC 120 V, 6 A
KNX shutter/ blind actuator 1 x 6A-5WG1 520-4CB23 -
Siemens
JB 512C23 – KNX switching actuator, 1 x AC 120–277 V, 20 A or AC 347 V, 15 AX, C-load
Binary output as built-in device-5WG1 512-4CB23
