Jung
KNX room controller LS TOUCH with frame LS 990, Secure, antique brass
ME459D1SAT – with integrated 1-gang frame LS 990 Only install as a single device, not suitable for combinations!
Description
ME459D1SAT – with integrated 1-gang frame LS 990 Only install as a single device, not suitable for combinations!
Related products
-
Famatel.USAMagnaUL NEMA 4X Polycarbonate Enclosure (15.7” x 23.6” x 7.8”, 14.8 Lbs) – 39146UL+I39146
MagnaUL NEMA 4X Polycarbonate enclosure, for indoor and outdoor installations. Description · NEMA 4X · Polycarbonate... -
Siemens
N 148/23 – KNX IP Interface Secure
IP Interface Secure is used for communication between KNX devices and PCs or other devices with... -
Siemens
N 140/13 – KNX line/backbone coupler
The line-/ backbone coupler provides a data connection between two separate KNX bus lines and isolates... -
WAGO
Bus connection block-2050 RT SW
Bus connection block-2050 RT SW -
Jung
1-gang toggle multi push-button (insert), 1-pole, 2-way push-button with 2 x 2 NO contacts, rocker in neutral position, 10 A 250 V ~
K531-41EU – with screw terminals for rigid and flexible wires up to 2.5 mm2 screw fixing... -
Siemens
JB 527C23 – KNX switch/dim actuator, 1 x AC 277 V, 20 A, 1–10 V
KNX universal dimmer as built-in device-5WG1 525-4CB23 -
Siemens
JB 513C23 – KNX binary output, 3 x 6 A, AC 120–277 V
KNX binary output (relay) as built-in device-5WG1 513-4CB23 -
Siemens
JB 525C23 – KNX universal dimmer, 1 x AC 120 V, 10–125 VA (R/L/C load)
KNX universal dimmer as built-in device-5WG1 525-4CB23 -
Crestron
Crestron Enclosure for DIN Rail Devices, 6 DIN Rails, 18 M Wide – DIN-EN-6X18
The Crestron® DIN‑EN series of UL® Listed enclosures provide centralized mounting solutions for DIN rail products... -
Siemens
JB 260C23 – KNX binary input, 4 x AC/DC 12–230 V
KNX binary input, 4-fold-5WG1 2604-CB23 -
Siemens
N 125/22 – KNX power supply, DC 29 V, 640 mA, additional unchoked output
KNX power supply unit, 640mA-5WG1 125-1AB22 -
Siemens
N 125/12 – KNX power supply, DC 29 V, 320 mA, additional unchoked output
KNX power supply unit, 160 mA-5WG1 125-1AB12
