Motion detector mini basic, white-BM 360 MB WW-270
Description
Intended use
Brightness-independent detection of motions in interiors
Connection to KNX e.g. multi station or push-button interface for automatic switching of loads
Power supply via unchoked output of a (KNX) power supply with SELV
Clamp mounting in suspended ceilings
Ceiling installation on fixed ceilings in flush box with dimensions according to DIN 49073 with flush mounting set (ref.-no.: PMM-UP-SET-WW)
Surface-mounted ceiling installation with surface mounting set (ref.-no.: PMM-AP-SET-WW)
Product characteristics
Brightness-independent detection of motions in the detection field
Switch on: After detection of a motion
Switch off: No motion in the detection field and run-on time elapsed
Floating electronic switching contact
Run-on time: approx. 270 s
Technical data about Motion detector mini basic, white BM 360 MB WW-270
Related products
-
JungCentre plate with toggle lever “cone”, with lens, 1 toggle lever, LS 1912 range
for 1-gang toggle switch ref.-no.: K 506 KO EU for 1-gang toggle push-button ref.-no.: K 534... -
Ekinex“Virtual” pushbutton Signum with Thermostst
Description “Virtual” KNX-standard pushbutton, i.e. based on a borderless IPS touch display, in which each button... -
EkinexAdvanced IP-KNX interface Konnect4 for KNX and/or Control4 installations
Ekinex Konnect4 Native integration in Control4 of Ekinex devices and configuration in Composer Pro The Ekinex... -
EkinexRoom temperature controller 20venti Series
Description The Ekinex® room temperature controller of 71 series regulates independently the temperature of a room... -
Jung
IP interface, Secure-IPS 300 SREG
IP interface, Secure-IPS 300 SREG -
Jung
Leakage sensor-LES 01
Intended use Detection of water penetration and leaks Connection to KNX push-button interfaces or other binary... -
Jung
Motion detector mini basic, white-BM 360 MB WW
Motion detector mini basic, white-BM 360 MB WW-270 -
Ekinex
4-fold pushbutton (right) with backlit text/symbols and proximity sensor
Description The Ekinex® 20venti series 4-fold pushbutton is used for on/off control of utility devices, dimming... -
Jung
1-gang toggle push-button insert, 1-pole, 1-way NO contact, without claws, low Voltage-K 531 EU
with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without claws installation... -
Jung
2-gang toggle multi push-button (insert), 2 x 1-pole, 2-way push-button with 4 floating 1-way NO contacts, rocker in neutral position, low Voltage-K 532-4 EU
with screw terminals for rigid and flexible wires up to 2.5 mm2 screw fixing only, without... -
Kaiser
Wall box for hollow walls, 1-gang -depth 62mm
Wall box for hollow walls, 1-gang -9064-02 (62mm) -
Siemens
N 148/12 – KNX USB Interface DIN rail mounting device
The KNX USB Interface is a data interface between a PC or laptop and the KNX installation bus. It can...
Customer Reviews
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.