Advanced IP-KNX interface Konnect4 for KNX and/or Control4 installations
Ekinex Konnect4 Native integration in Control4 of Ekinex devices and configuration in Composer Pro The Ekinex device range is now compatible with the Control4 ecosystem. In Composer Pro it is possible to configure Ekinex products and integr
Description
Native integration in Control4 of Ekinex devices and configuration in Composer Pro
The Ekinex device range is now compatible with the Control4 ecosystem. In Composer Pro it is possible to configure Ekinex products and integrate them into a Control4 automation system, even making them interact with third-party devices.
A single driver for all our wall-mount devices
All Ekinex wall-mount devices with thermostats are programmable with our Composer Pro driver, which automatically recognizes the model and allows the operating parameters to be set.
All the programming done in Composer Pro
No Need for ETS: all programming can be done directly within Composer Pro!
Thanks to SDDP discovery, the Konnect 4 gateway and all devices connected to the BUS are automatically detected and added to the project. The supplied drivers allow you to download the configuration directly from Composer Pro, and offer all the connections necessary to realize the functions you want.
Advantages
Flexibility of combining EKINEX and CONTROL4 products in the same installation.
Very easy cabling for installers.
Enhancement of the Control4 proposal with design-oriented products.
The same devices can be used by KNX professionals (with ETS) and by non-experts directly in Composer Pro.
Maximum reliability being the solution based on KNX standard.
Win-win product offering for all markets, by fitting the different needs, styles and expectations of installers and end users.
Related products
-
Jung
Centre plate with toggle lever “cone”, 1 toggle lever, LS 1912 range
for 1-gang toggle switch ref.-no.: K 501 EU, K 506 EU, K 507 EU for 1-gang... -
Ekinex
4-fold pushbutton (left) with backlit text/symbols and proximity sensor
Description The Ekinex® 20venti series 4-fold pushbutton is used for on/off control of utility devices, dimming... -
Jung
Frame LS990 Gold-plated
Frame LS990 Gold-plated -
Jung
1-gang toggle push-button insert, 1-pole, 1-way NO contact, without claws, low Voltage-K 531 EU
with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without claws installation... -
Jung
Leakage sensor-LES 01
Intended use Detection of water penetration and leaks Connection to KNX push-button interfaces or other binary... -
Jung
Bluetooth® Low Energy radio transmitter 2-channel, LS range
2-channel including mounting plate, adhesive pad and fastening screw Smart switch for wireless device control using... -
Ekinex
“Virtual” pushbutton Signum
Description “Virtual” KNX-standard pushbutton, i.e. based on a borderless IPS touch display, in which each button... -
Jung
KNX weather station “home”-2224 WH
Measurement and evaluation of weather data: wind speed, precipitation, twilight, temperature and brightness Vertical mounting on... -
Jung
Centre plate with toggle lever “cube”, 2 x 2 toggle levers, horizontal, LS 1912 range, chrome-GCR 12-250 E 22
for 2-gang toggle switch ref.-no.: K 505 EU, K 509 EU for 2-gang toggle push-button ref.-no.:... -
Siemens
N 125/22 – KNX Power supply unit DC 29 V, 640 mA with additional unchoked output, N 125/22
KNX power supply unit, 640mA-5WG1 125-1AB22 -
Jung
Bluetooth® Low Energy radio transmitter 4-channel, LS range
2-channel including mounting plate, adhesive pad and fastening screw Smart switch for wireless device control using... -
Jung
Motion detector mini basic, white-BM 360 MB WW
Motion detector mini basic, white-BM 360 MB WW-270
Reviews
There are no reviews yet.