Zennio
KLIC-MITT v3 – Mitsubishi Electric-KNX gateway (IT connector)
Zennio gateway to control Mitsubishi Electric air conditioning units through IT terminal connector from KNX system in a bidirectional way. It includes 2 analog-digital inputs for temperature probes, motion sensor or dry contact binary input
Description
Zennio gateway to control Mitsubishi Electric air conditioning units through IT terminal connector from KNX system in a bidirectional way. It includes 2 analog-digital inputs for temperature probes, motion sensor or dry contact binary inputs (switches, sensors or push buttons) and 10 logical functions.
Related products
-
ZennioEyeZen IN – Motion detector with luminosity sensor, ceiling mounting
The motion sensor with infrared detection technology is complemented by an integrated luminosity sensor, which makes... -
Zennio
DALI BOX Interface 64 v3 – KNX-DALI interface, 1 channel
KNX-DALI Interface for DIN-rail (4.5 units) to control up to 64 DALI ballasts, which can be... -
Zennio
DALI BOX Broadcast 4CH v2 – KNX-DALI broadcast interface, 4 channels
KNX-DALI broadcast interface module for DIN rail mounting (4.5 units). It incorporates 4 channels controlled via... -
Zennio
KLIC-FJT – Fujitsu-KNX gateway
Zennio gateway to control Fujitsu, General, Hiyasu and Fuji Electric air conditioning units from KNX system... -
Zennio
MAXinBOX 20 – KNX Secure multifunction actuator, 20 outputs 16A
Multifunction actuator for DIN-rail (10 units) that offers multiple configurations of up to 10 shutter channels,... -
Zennio
Flat Sensato v2 KNX Humidity and Temperature sensor for flush mounting
KNX Humidity and temperature sensor for flush mounting with a flat design. It measures ambient temperature,... -
Zennio
MAXinBOX 24 v2 – KNX multifunction actuator, 24 outputs 16A
Multifunction actuator for DIN-rail (10 units) that offers multiple configurations of up to 10 shutter channels,... -
Zennio
FANinBOX 110V 1CH – Ceiling fan controller, 3 speeds at 110VAC
Ceiling fan controller for fan units powered at 110 VAC (2 DIN-rail units). It allows the... -
Zennio
KLIC-PA – Panasonic-KNX gateway
Zennio gateway to control Panasonic air conditioning units from KNX system in a bidirectional way. It... -
Zennio
DALI BOX Broadcast 6CH v2 – KNX-DALI broadcast interface, 6 channels
KNX-DALI broadcast interface module for DIN rail mounting (4.5 units). It incorporates 6 channels controlled via... -
ZennioKLIC-DD v3 – Daikin-KNX gateway (Residential range)
Zennio gateway to control Daikin residential air-conditioning units from KNX system in a bidirectional way. It... -
Zennio
DALI BOX Interface 64 X2 – KNX-DALI interface, 2 channels
KNX-DALI Interface for DIN-rail (4.5 units) with two independent DALI channels, to control up to 64...
Customer Reviews
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.