Description
to clip on F 40 push-button modules 3-gang
ref.-no.: 4193 TSM-01, 4093 TSEM-01, 4293 1ST
Related products
-
DALI BOX Interface 64 v3: Interfaz KNX-DALI para hasta 64 balastos por canal – 1 canal
KNX-DALI Interface for DIN-rail (4.5 units) to control up to 64 DALI ballasts, which can be...Login -
ALLinBOX 1612 v3. Multifunction device with KNX power supply, KNX-IP Interface, 16 outputs/12 inputs and logic module
The starting point for most projects incorporating control and monitoring functionalities. Multifunction device that integrates a...Login -
DALI BOX Broadcast 6CH v2 KNX-DALI Broadcast Interface for up to 6 channels with up to 64 ballasts each
KNX-DALI broadcast interface module for DIN rail mounting (4.5 units). It incorporates 6 channels controlled via...Login -
KLIC-DA v2. Daikin-KNX gateway (Altherma LT range)
Zennio gateway to control Daikin Altherma/Altherma 3 units from KNX system in a bidirectional way (see...Login -
KLIC-FJ Gateway
Zennio gateway to control Fujitsu, General, Hiyasu and Fuji Electric air conditioning units from KNX system...Login -
KLIC-MITT v3. Mitsubishi Electric-KNX gateway (IT connector)
Zennio gateway to control Mitsubishi Electric air conditioning units through IT terminal connector from KNX system...Login -
Lumento DX4 v2. 4-channel constant voltage PWM dimmer in DIN rail for DC LED loads.
LED dimmer with 4 channels designed for LED technology, featuring constant voltage regulation and DIN-rail mounting...Login -
KLIC-DI v2. Daikin-KNX gateway (SKY and VRV range)
Zennio gateway to control Daikin commercial and industrial air-conditioning units from KNX system in a bidirectional...Login -
KUPSupply 640mA KNX Universal power supply 640 mA with additional output
KNX Universal System Power Supply with additional 29 V DC output. Maximum current 640 mA. 110-240 V ~ 50/60 Hz input voltage....Login -
FANinBOX 110V 1CH. Ceiling fan controller 3- speeds @110VAC
Ceiling fan controller for fan units powered at 110 VAC (2 DIN-rail units). It allows the...Login -
Flat Sensato v2 KNX Humidity and Temperature sensor for flush mounting
KNX Humidity and temperature sensor for flush mounting with a flat design. It measures ambienttemperature, relative...Login -
Temperature probe 10K NTC
10K NTC temperature probe for Zennio inputs which allow custom NTC probe configuration. The compact size...Login
Reviews
There are no reviews yet.