Description
Zennio gateway to control LG air conditioning units from KNX system in a bidirectional way. It includes 3 analog-digital inputs for temperature probes, motion sensor or dry contact binary inputs (switches, sensors or push buttons) and 10 logical functions. Accessories: temperature probe and motion sensor.
Related products
-
DALI BOX Interface 64 X2. KNX-DALI Interface for up to 64 ballasts per channel – 2 channels
KNX-DALI Interface for DIN-rail (4.5 units) with two independent DALI channels, to control up to 64...Login -
DALI BOX Broadcast 6CH v2 KNX-DALI Broadcast Interface for up to 6 channels with up to 64 ballasts each
KNX-DALI broadcast interface module for DIN rail mounting (4.5 units). It incorporates 6 channels controlled via...Login -
FANinBOX 110V 1CH. Ceiling fan controller 3- speeds @110VAC
Ceiling fan controller for fan units powered at 110 VAC (2 DIN-rail units). It allows the...Login -
Flat Sensato v2 KNX Humidity and Temperature sensor for flush mounting
KNX Humidity and temperature sensor for flush mounting with a flat design. It measures ambienttemperature, relative...Login -
NarrowDIM X2. Universal dimmer actuator. 2 channels x 210W. 2 DIN units
Universal dimming actuator (RLC, LED, CFL*) for DIN-rail mounting (2 units) with 2 channels for up...Login -
Presentia C v2 KNX presence detector with luminosity and temperature sensors for ceiling mounting
Presence detector with luminosity sensor for ceiling mounting, with a detection area of 360º and up...Login -
ALLinBOX 88 v2. Multifunction device with KNX power supply, KNX-IP Interface, 8 outputs/8 inputs and logic module
The starting point for most projects incorporating control and monitoring functionalities. Multifunction device that integrates a...Login -
EyeZen TP v2 KNX motion detector with luminosity sensor for ceiling mounting
Motion detector with luminosity sensor for ceiling mounting, with a detection area of 360º and up...Login -
KLIC-DA v2. Daikin-KNX gateway (Altherma LT range)
Zennio gateway to control Daikin Altherma/Altherma 3 units from KNX system in a bidirectional way (see...Login -
KUPSupply 640mA KNX Universal power supply 640 mA with additional output
KNX Universal System Power Supply with additional 29 V DC output. Maximum current 640 mA. 110-240 V ~ 50/60 Hz input voltage....Login -
KLIC-FJ Gateway
Zennio gateway to control Fujitsu, General, Hiyasu and Fuji Electric air conditioning units from KNX system...Login -
MINiBOX 0-10V X2. 2 fold 0-10V analog input/output multifunction module
DIN rail mounting actuator (2 DIN wide) with 2 channels configurable as 0-10 V outputs, 0-10 V inputs...Login
Reviews
There are no reviews yet.