N 141/03/N 141/21 KNX/DALI GATEWAY PLUS &TWIN PLUS
SKU: 5WG1141-1AB03
Category: Dimmactuator, Uncategorized
Description
- 1 or 2 DALI Channel, 64 or 128 DALI devices per channel
- Replacement of defective ECGs without software
- DALI max. length: 1000ft with 2x14AWG
- DALI-2 certified
- Support of DALI DT8 ECGs (tunable white)
Related products
-
KNX room controller LS TOUCH with frame LS 990, LS range, rouge vermillon 31 (32090)
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
“Virtual” pushbutton Signum with Thermostst
Description “Virtual” KNX-standard pushbutton, i.e. based on a borderless IPS touch display, in which each button... -
KNX room controller LS TOUCH with frame LS 990, LS range, vert olive vif (4320F)
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
IP interface, Secure-IPS 300 SREG
rail mounting device, 2 rail unitsProject design and commissioning with ETS5 or a more recent version... -
KNX room controller LS TOUCH with frame LS 990, LS range, le jaune vif (4320W)
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
KNX room controller LS TOUCH with frame LS 990, LS range, antique brass
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
Touch & Control FF Series – 71 Series – 20venti Series – Signum
Designed to integrate into any building, the KNX Touch&Control 4” display is a perfect combination of... -
N 148/12 – KNX USB Interface Din Rail mounting device-5WG11481AB12
The KNX USB Interface is a data interface between a PC or laptop and the KNX installation bus. It can... -
KNX room controller LS TOUCH with frame LS 990, LS range, rouge rubia (32101)
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
KNX room controller LS TOUCH with frame LS 990, LS range, classic brass
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
4 in 1 200W DALI DT8 LED Driver(Constant Voltage)
4 in 1 DALI DT8 LED driver, max. output power 200W totalIn compliance with IEC 62386-101:2014,... -
Crestron Enclosure for DIN Rail Devices, 6 DIN Rails, 18 M Wide – DIN-EN-6X18
The Crestron® DIN‑EN series of UL® Listed enclosures provide centralized mounting solutions for DIN rail products...
Request Price
N 141/03/N 141/21 KNX/DALI GATEWAY PLUS &TWIN PLUS
Project Planning Request
A gioded request to help us understand your project

