Cover kit 3-gang, F50, LS range, Thermoplastic (breakproof) high-gloss
Description
to clip on F 50 push-button modules 3-gang of the LS range
ref.-no.: LS 5073 TSM, LS 5293 1ST, LS 5093 TSEM, LS 5073 RF TSM, LS 5236 TSM, FM LS 5003 M, SI TM LS 5073, SI TM LS 5093
Thermoplastic (breakproof) high-gloss
Cradle to Cradle certified
Related products
-
Leakage sensor-LES 01
Intended useDetection of water penetration and leaksConnection to KNX push-button interfaces or other binary inputs with... -
4-fold pushbutton (left) with backlit text/symbols and proximity sensor
Description The Ekinex® 20venti series 4-fold pushbutton is used for on/off control of utility devices, dimming... -
KNX Binary input, 8-gang-2128 REG
rail mounting device, 4 rail units8 inputs 12 … 48 V AC/DCAuxiliary voltage output DC 24 V (SELV) for polling floating contactswith status indicatorETS... -
2-gang toggle multi push-button (insert), 2 x 1-pole, 2-way push-button with 4 floating 1-way NO contacts, rocker in neutral position, low Voltage-K 532-4 EU
with screw terminals for rigid and flexible wires up to 2.5 mm2 screw fixing only, without clawsinstallation into... -
1-gang toggle multi push-button (insert), 1-pole, 2-way push-button with 2 x 2 NO contacts, rocker in neutral position, low Voltage-K 531-41 EU
with screw terminals for rigid and flexible wires up to 2.5 mm2 screw fixing only, without clawsinstallation into... -
Centre plate with toggle lever “cube”, 2 x 2 toggle levers, horizontal, LS 1912 range, chrome-GCR 12-250 E 22
for 2-gang toggle switch ref.-no.: K 505 EU, K 509 EUfor 2-gang toggle push-button ref.-no.: K 535 EUfor toggle multi push-button ref.-no.: K 532-4 EU2... -
KNX Binary input, 6-gang-2116 REG
rail mounting device, 2 rail units6 inputs AC/DC 10 … 230 V ~(different line conductors possible, e.g.: E1-3 = L1 and E4-E6 =... -
Condensation sensor-BTS 01
Intended useDetection of water condensation on coolant lines in residential or functional buildingsConnection to KNX push-button... -
“Virtual” pushbutton Signum with Thermostst
Description “Virtual” KNX-standard pushbutton, i.e. based on a borderless IPS touch display, in which each button... -
Combi sensor-WS 10 KS
The combi sensor serves for the measurement of the wind speed, brightness dawn and rain. The... -
1-gang toggle push-button insert, 1-pole, 1-way NO contact, without claws, low Voltage-K 531 EU
with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without clawsinstallation into flush box... -
N 148/12 – KNX USB Interface Din Rail mounting device-5WG11481AB12
The KNX USB Interface is a data interface between a PC or laptop and the KNX installation bus. It can...